Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12:10. Back door (Coupet's model)
   12:11. Forward door, lower door loop
   12:12. Adjustment of a window and the bearing door element
   12:13. The window condensing traffic jams, the window regulator
   12:14. Door lock
   12:15. Draft of lever transfer of the lock
   12:16. Rope of the internal door lock
   12:17. Rotary clamp, adjusting spring
   12:18. Adjustment of doors
   12:19. The bearing door element
   12:20. Central lock
   12:21. The pump with two modes of forcing
   12:22. Leading activator
   12:23. Activator of a back door
   12:24. Trunk lid activator
   12:25. Activator of a cover of the fuel tank
   12:26. Door glass (Coupet's model)
   12:27. Adjustment of a butt slip (Coupet's model)
   12:28. Framework of a back door, lower loop of a door
   12:29. The bearing element of a back door, the condensing stopper
   12:30. Rope, hinged lever
   12:31. Door handle
   12:32. Holder of components of a door
   12:33. Hatch
   12:34. Bumper casing
   12:35. Sealing of a rear bumper
   12:36. The extending clamp
   12:37. Forward spoiler / laying of a niche of a wheel (Coupet's model)
   12:38. Top overlay of a forward spoiler (Coupet's model)
   12:39. Back spoiler / laying of a niche of a wheel
   12:40. Rear bumper (Coupet's model)
   12:41. Window regulators
   12:42. Internal finishing of a body
   12:43. Sitting
+ 13. Air conditioning system
+ 14. Electric equipment



buy cheap viagra online



12:42. Internal finishing of a body

GENERAL INFORMATION

Finishing of a forward door, its components

1. Crosswise screws, 1.5 N. of m.
2. Connection of the panel (back)
weaken and take out from a frame
3. The control unit in an armrest
4. Crosswise screws, 2.5 N. of m.
fix an armrest to the panel of internal finishing of a door
5. Armrest (lower part)
the spline is inserted into a cut in the top part
6. Crosswise screw, 1.5 N. of m.
7. Laying
8. Panel of internal finishing of a door
9. Insulating material
it is attached to the finishing panel by means of clips
10. Laying for fixing brackets of the panel of internal finishing
fix by means of adhesive substance

11. Finishing detail
it is not required to remove it together спанелью internal finishing
12. Adjustment of height
13. Connection of the panel (forward)
weaken and take out from a frame
14. Internal mechanism of opening of a door
press in the direction specified by an arrow and get from the door panel having removed draft
15. Blocking button
removal
turn approximately on 120 ° to the left and extend
installation
insert (the blocking button has to be 16 mm above the directing ring) turn on 120 ° to the right


Finishing of a back door, its components

1. Connection of the panel (back)
weaken and take out from a frame
2. Crosswise screws, 1.5 N. of m.
3. Armrest (top part)
4. Screws with a six-sided head, 2.5 N. of m.
5. Armrest (lower part)
the spline is inserted into a cut in the top part
6. Crosswise screw, 1.5 N. of m.
7. Laying
8. Panel of internal finishing of a door
9. Laying for fixing brackets of the panel of internal finishing
fix by means of adhesive substance
10. Height regulator
11. Connection of the panel (predny)
weaken and take out from a frame

12. Blocking button
to remove the button it is not obligatory to disassemble it
removal
turn approximately on 120 ° to the left and extend
installation
insert (the blocking button has to be 16 mm above the directing ring) turn on 120 ° to the right
13. Internal mechanism of opening of a door
press in the direction specified by an arrow and get from the door panel having removed the lever a pusher

Components of finishing of a forward door (Coupet's model)

1. Lock washer
2. Isolation
it is attached to the panel of internal finishing
by means of clips
do not use a washer anew if it is damaged
3. Lock washer
4. Panel of internal finishing of a door
it is attached to a door by means of clips
7. Armrest arm
2,5 N. the m is fixed by means of the screw.
8. Armrest
9. The self-cut screw with an internal hexagon, 2,5 N. of m, an internal side
4,0 mm.
10. Crosswise screw, 2.5 N. of m.
11. Control panel

12. Panel of internal finishing of a door
to remove the finishing panel, pull it up
13. The internal mechanism opening a door
press forward and get from the finishing panel of a door
disconnect from the pusher lever
14. Guide of the blocking button
15. Blocking button
removal
turn on 180 ° and get from the finishing panel
to remove the blocking button, it is not obligatory to disassemble it
16. Height regulator