Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12:10. Back door (Coupet's model)
   12:11. Forward door, lower door loop
   12:12. Adjustment of a window and the bearing door element
   12:13. The window condensing traffic jams, the window regulator
   12:14. Door lock
   12:15. Draft of lever transfer of the lock
   12:16. Rope of the internal door lock
   12:17. Rotary clamp, adjusting spring
   12:18. Adjustment of doors
   12:19. The bearing door element
   12:20. Central lock
   12:21. The pump with two modes of forcing
   12:22. Leading activator
   12:23. Activator of a back door
   12:24. Trunk lid activator
   12:25. Activator of a cover of the fuel tank
   12:26. Door glass (Coupet's model)
   12:27. Adjustment of a butt slip (Coupet's model)
   12:28. Framework of a back door, lower loop of a door
   12:29. The bearing element of a back door, the condensing stopper
   12:30. Rope, hinged lever
   12:31. Door handle
   12:32. Holder of components of a door
   12:33. Hatch
   12:34. Bumper casing
   12:35. Sealing of a rear bumper
   12:36. The extending clamp
   12:37. Forward spoiler / laying of a niche of a wheel (Coupet's model)
   12:38. Top overlay of a forward spoiler (Coupet's model)
   12:39. Back spoiler / laying of a niche of a wheel
   12:40. Rear bumper (Coupet's model)
   12:41. Window regulators
   12:42. Internal finishing of a body
   12:43. Sitting
+ 13. Air conditioning system
+ 14. Electric equipment






12:11. Forward door, lower door loop

GENERAL INFORMATION

Forward door in assembly

1. Overlay of a groove of a door
only on Audi-90 models
for removal pull out from the top part of an upholstery of a door
2. The condensing laying, back
3. Adjusting washer
4. Bolt, 8 N. of m.
5. Shock-proof whetstone
6. Door covering
7. The extending clamps
8. Bolt, 8 N. of m.
9. A door loop, lower, with the limiter of opening of a door
10. Bolt, 30 N. of m.
11. The plug with cutting
12. Door loop, top
13. Bolt, 30 N. of m.
14. Sealant of a window groove, external
removal is possible only on condition of removal of the holder of a window
15. The condensing laying, forward

Forward door, removal

PERFORMANCE ORDER
unscrew bolts with a six-sided head (arrow)


Installation

Carry out installation upside-down, in view of the following:

PERFORMANCE ORDER
1) establish bolts with a six-sided head
2) apply AOS 126 000 05 lubricant or equivalent on the specified places of the lower door loop

Forward door in assembly (Coupet's model)

1. Sealant of a window groove
removal is possible тольуко on condition of removal of the holder of a window
2. The extending clamp
3. Shock-proof whetstone
4. A bolt with a six-sided head
5. Plug
6. A door loop, with the limiter of opening of a door
7. Door loop, top
8. A bolt with a six-sided head, 40 N. of m.
9. Door

Forward door, removal

PERFORMANCE ORDER
disconnect electric wires of the regulator of a window, door locks and a mirror

Forward door, installation

Carry out installation upside-down.


PERFORMANCE ORDER
1) level and adjust a door
2) check and adjust as it is necessary, the window regulator
3) connect all electric wires and sockets
4) check, the window regulator, mirrors and door locks how correctly function
5) apply AOS 126 000 05 lubricant or its equivalent on the specified places (shooters) of the lower door loop

Forward door, replacement

Since VIN 8B MA 008 401, the door covering was changed. Therefore as the spare part only the doors executed in new style will be available. At installation of a new door on the old car, it is also necessary to make installation or replacement of the following details:

1 – decorative door panel;
2 – window regulator;
3 – the external door condensing laying;
4 – flat nut / washer;
5 – cover of the decorative panel;
6 – basis of the holder of an external mirror.