Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12:10. Back door (Coupet's model)
   12:11. Forward door, lower door loop
   12:12. Adjustment of a window and the bearing door element
   12:13. The window condensing traffic jams, the window regulator
   12:14. Door lock
   12:15. Draft of lever transfer of the lock
   12:16. Rope of the internal door lock
   12:17. Rotary clamp, adjusting spring
   12:18. Adjustment of doors
   12:19. The bearing door element
   12:20. Central lock
   12:21. The pump with two modes of forcing
   12:22. Leading activator
   12:23. Activator of a back door
   12:24. Trunk lid activator
   12:25. Activator of a cover of the fuel tank
   12:26. Door glass (Coupet's model)
   12:27. Adjustment of a butt slip (Coupet's model)
   12:28. Framework of a back door, lower loop of a door
   12:29. The bearing element of a back door, the condensing stopper
   12:30. Rope, hinged lever
   12:31. Door handle
   12:32. Holder of components of a door
   12:33. Hatch
   12:34. Bumper casing
   12:35. Sealing of a rear bumper
   12:36. The extending clamp
   12:37. Forward spoiler / laying of a niche of a wheel (Coupet's model)
   12:38. Top overlay of a forward spoiler (Coupet's model)
   12:39. Back spoiler / laying of a niche of a wheel
   12:40. Rear bumper (Coupet's model)
   12:41. Window regulators
   12:42. Internal finishing of a body
   12:43. Sitting
+ 13. Air conditioning system
+ 14. Electric equipment



На сайте http://kuban-granit.ru памятники на могилу фото и цены.



12:33. Hatch

GENERAL INFORMATION

Hatch

1. Hatch cover
2. The condensing laying of a cover of the hatch
3. Hatch cover bolt
4. Bolt of adjustment of height, forward
5. Screw of adjustment of height, back
6. Hatch cover loop
7. A screw with a flat head
8. Fairing
9. Sound-absorbing laying
10. Side guide of a rail
11. Restrictive arm

12. The screw with a spherical head
13. A screw with a flat head
14. Rain deflector
15. A back guide (with a rope)
16. Inclined arm
17. Elevator / holder of the hatch
18. Forward support of the hatch
19. Hatch cover covering
20. Lock clip of a covering of a cover of the hatch

Hatch cover, the making elements

1. Sealing laying of a cover of the hatch
2. Finishing detail
3. Rastyadzheniye spring
4. Hatch cover loop
5. Rubber elastic laying

6. Lamellar spring
7. Protective felt laying
8. Protective felt laying
9. Rubber limiter
10. A tape (holds a spring on the place)

The making hatch elements (Coupet's model)

1. Connecting draft
2. Ram (2x)
3. Back trench of a drainage system
before removal of a trench of a drainage system remove a guide with the lifting channel
4. Rope
5. A back guide with a rope
6. A guide with the lifting channel
7. Side cover
for removal weaken lock bolts
and with a force shift a side cover
opposite to the condensing laying
hatch covers, and then tighten bolts
8. Hollow rivet

9. The directing trench
it is recorded by means of rivets
for removal to a simimta a framework also drill rivets
10. Secret screws (7x)
11. Guide cover
12. Reflector
disconnect the lifting lever before removal
13. Secret screw
14. Hollow rivet
15. Hollow rivet
16. Nut
17 The directing rope tubes
for removal you yvsverlit rivets
18. A bolt with a washer (3x)