Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car


Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
- 8. Transmission
   8.1.2. A fork - the main cylinder of coupling
   8.1.3. Press clutch plate
   8.1.4. Malfunctions of coupling
   + 8.2. Mechanical transmission 012
   + 8.3. Mechanical transmission 01A
   + 8.4. Automatic transmission 089
   + 8.5. Automatic transmission 087
   8.6. Dismantling and assembly of automatic transmissions
   8.7. Block of valves
   + 8.8. Automatic transmission 097
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment


8. Transmission

8.1. Coupling

8.1.1. Coupling pedal
GENERAL INFORMATION

Coupling pedal device
1. Plug
check regarding wear, if necessary replace
get by means of a drift, establish by means of a vice
2. Returnable spring
3. Pedal arm
4. Returnable spring
remove / establish by the tool 3117
5. Clip
6. Clip
7. Coupling pedal
8. 20 N. of m.
9. Fork
10. Pin
11. Main cylinder of coupling
12. Hydraulic hose
13. Brake pedal
adjust pedal height before adjustment of a fork of the main cylinder of coupling
14. Clip

Grease all bearings and the rubbing surfaces with MoS2 lubricant.

Prevention

If the pedal of coupling does not come back to a starting position properly even if the fork is adjusted correctly, can be the cause of it:

– air in a hydraulic system;
– jamming of a returnable spring or plug of a pedal.

The additional carpet should not interfere with the course of a brake pedal.