Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12:10. Back door (Coupet's model)
   12:11. Forward door, lower door loop
   12:12. Adjustment of a window and the bearing door element
   12:13. The window condensing traffic jams, the window regulator
   12:14. Door lock
   12:15. Draft of lever transfer of the lock
   12:16. Rope of the internal door lock
   12:17. Rotary clamp, adjusting spring
   12:18. Adjustment of doors
   12:19. The bearing door element
   12:20. Central lock
   12:21. The pump with two modes of forcing
   12:22. Leading activator
   12:23. Activator of a back door
   12:24. Trunk lid activator
   12:25. Activator of a cover of the fuel tank
   12:26. Door glass (Coupet's model)
   12:27. Adjustment of a butt slip (Coupet's model)
   12:28. Framework of a back door, lower loop of a door
   12:29. The bearing element of a back door, the condensing stopper
   12:30. Rope, hinged lever
   12:31. Door handle
   12:32. Holder of components of a door
   12:33. Hatch
   12:34. Bumper casing
   12:35. Sealing of a rear bumper
   12:36. The extending clamp
   12:37. Forward spoiler / laying of a niche of a wheel (Coupet's model)
   12:38. Top overlay of a forward spoiler (Coupet's model)
   12:39. Back spoiler / laying of a niche of a wheel
   12:40. Rear bumper (Coupet's model)
   12:41. Window regulators
   12:42. Internal finishing of a body
   12:43. Sitting
+ 13. Air conditioning system
+ 14. Electric equipment






12. Body, salon

12.1. Body sizes

GENERAL INFORMATION

If other is not specified, all tolerances make ± 2.0 mm.

Sedan. Sizes of a floor of a forward part of a body



 

And = 1200 mm
B = 1143 mm
C = 952 ± 1,0 mm
D = 1555 mm
E = 721 ± 1,0 mm
F = 734 ± 3,0 mm
G = 452 ± 2,0 mm
H = 1050 ± 1,0 mm
I = 1022 ± 1,0 mm

Sedan. Sizes of a forward part of a body

 
N = 601 ± 1,0 mm
O = 927 ± 1,0 mm
P = 686 ± 1,0 mm

Sedan. Sizes of a forward part of a body

 
L = 1050 ± 1,0 mm
M = 1626 ± 2,0 mm

Sedan. Side sizes

 
J = 1090 ± 2,0 mm
K = 682 ± 1,0 mm

Sedan. Side sizes, sizes of a back part

 
Q = 1380 ± 1,0 mm
R = 1360 ± 2,0 mm
S = 1226 ± 1,0 mm
T = 470 ± 1,0 mm

The body floor sizes for all-wheel drive models

 
A' = 1200 mm
B' = 732 mm
With' = 450 mm
D' = 722 mm
E' = 1143 mm
F' = 734 mm
G' = 1031 mm
H' = 616 mm

The sizes of the lower part of a body for all-wheel drive models

 
B1 = 732 mm
C1 = 450 mm
D1 = 722 mm
G1 = 103 mm

The sizes of a forward part of a body for all-wheel drive models, and also Coupet

 
A = 1022 ± 2,0 mm
B = 1626 ± 1,0 mm

The sizes of a forward part of a body for all-wheel drive models, and also Coupet

 
C = 1050 ± 2,0 mm
D = 682 ± 1,0 mm

The sizes of the parties for all-wheel drive models, and also Coupet

 
E = 1385 ± 1,0 mm
F = 1110 ± 1,0 mm

The sizes of a back part of a body for all-wheel drive models, and also Coupet
 
G = 1066 ± 1,0 mm
H = 1255 ± 2,0 mm

The sizes of a floor of a back part of a body for all-wheel drive models, and also Coupet
 
I = 722 ± 2,0 mm
J = 450 ± 1,0 mm
K = 732 ± 2,0 mm