Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car

Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
- 12. Body, salon
   12.2. Central section of a guard
   12.3. Cowl rope
   12.4. Forward guard
   12.5. Forward wing
   12.6. Lock pins of a cowl, rubber shock-absorber
   12.7. Cowl
   12.8. Gas-filled rack (Sedan models)
   12.9. Trunk lid
   12:10. Back door (Coupet's model)
   12:11. Forward door, lower door loop
   12:12. Adjustment of a window and the bearing door element
   12:13. The window condensing traffic jams, the window regulator
   12:14. Door lock
   12:15. Draft of lever transfer of the lock
   12:16. Rope of the internal door lock
   12:17. Rotary clamp, adjusting spring
   12:18. Adjustment of doors
   12:19. The bearing door element
   12:20. Central lock
   12:21. The pump with two modes of forcing
   12:22. Leading activator
   12:23. Activator of a back door
   12:24. Trunk lid activator
   12:25. Activator of a cover of the fuel tank
   12:26. Door glass (Coupet's model)
   12:27. Adjustment of a butt slip (Coupet's model)
   12:28. Framework of a back door, lower loop of a door
   12:29. The bearing element of a back door, the condensing stopper
   12:30. Rope, hinged lever
   12:31. Door handle
   12:32. Holder of components of a door
   12:33. Hatch
   12:34. Bumper casing
   12:35. Sealing of a rear bumper
   12:36. The extending clamp
   12:37. Forward spoiler / laying of a niche of a wheel (Coupet's model)
   12:38. Top overlay of a forward spoiler (Coupet's model)
   12:39. Back spoiler / laying of a niche of a wheel
   12:40. Rear bumper (Coupet's model)
   12:41. Window regulators
   12:42. Internal finishing of a body
   12:43. Sitting
+ 13. Air conditioning system
+ 14. Electric equipment

12:20. Central lock

GENERAL INFORMATION

Central lock

1. Activator of a back right door
2. Guide of wires attached
3. The Troynikovy connector is located ahead of a guide of a front seat
4. Leading activator, forward right door
5. Connecting loop
fixes wires to the case
6. Cover
7. Electric wire
8. Pressure head / vacuum hose
9. Leading activator
10. Troynikovy connector
it is located ahead of a guide of a front seat

11. Activator of a back left door
12. Connecting loop
it is fixed on a fillet of a top beer tank
13. Activator, trunk lid
14. Crosswise connecting device
it is located in the luggage compartment on a casing of the right wheel
15. And
16. The pump with two modes of forcing

Central lock (Coupet's model)

1. The pump with two modes of forcing and the control unit
removal: remove the side decorative panel
remove the pump with a fixing strip
disconnect a fixing tape, having pressed the screw-driver on back honor of a fixing ear
disconnect wires
2. Leading vktivator, forward right door
3. Cover

4. Troynikovy connector
it is located in the right forward compartment for legs
5. Pressure head vacuum hose
6. Bracket of fastening of an electrical wiring
7. Leading activator, forward left door
8. Activator, trunk lid
9. The Troynikovy connector is located behind the decorative panel on the right side

If the central lock did not work during the long period of time or the pump with two modes of forcing was replaced, for activization of system it is necessary to turn a key in the lock. If the system functions correctly, all locks have to be closed after two seconds.