Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
- 8. Transmission
   8.1.2. A fork - the main cylinder of coupling
   8.1.3. Press clutch plate
   8.1.4. Malfunctions of coupling
   + 8.2. Mechanical transmission 012
   + 8.3. Mechanical transmission 01A
   - 8.4. Automatic transmission 089
      8.4.2. Lever and rope of the lever of gear shifting
      8.4.3. Lock of automatic gear shifting
      8.4.4. Mechanism of management of a butterfly valve
      8.4.5. Removal and installation of the transmission
      8.4.6. Check of the moments of gear shifting
      8.4.7. Main transfer
      8.4.8. Differential
   + 8.5. Automatic transmission 087
   8.6. Dismantling and assembly of automatic transmissions
   8.7. Block of valves
   + 8.8. Automatic transmission 097
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment






8.4.7. Main transfer

GENERAL INFORMATION

Transmission 089/main transfer
1. Hydrotransformer
2. Case of the main transfer
3. Hydrotransformer epiploon
4. 30 N. of m.
5. Regulator
6. Turbine shaft
it is possible to remove and establish only after separation of the transmission and main transfers
7. Pump shaft
completely insert into the pump before installation of the hydrotransformer
8. An epiploon, always replace
9. Washer
10. Laying
always replace
11. Feeding the tube / probe for measurement of level of cooling liquid
12. Transmission
13. Epiploon
always replace
14. Bolt of Banjo 40 connection of N. of m.
15. Radiator of cooling liquid line 5-row