Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
- 8. Transmission
   8.1.2. A fork - the main cylinder of coupling
   8.1.3. Press clutch plate
   8.1.4. Malfunctions of coupling
   + 8.2. Mechanical transmission 012
   + 8.3. Mechanical transmission 01A
   - 8.4. Automatic transmission 089
      8.4.2. Lever and rope of the lever of gear shifting
      8.4.3. Lock of automatic gear shifting
      8.4.4. Mechanism of management of a butterfly valve
      8.4.5. Removal and installation of the transmission
      8.4.6. Check of the moments of gear shifting
      8.4.7. Main transfer
      8.4.8. Differential
   + 8.5. Automatic transmission 087
   8.6. Dismantling and assembly of automatic transmissions
   8.7. Block of valves
   + 8.8. Automatic transmission 097
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment



иранские ковры купить ковры от.
Ременная нейлоновая лента.
Ремонт квартир в новостройке под ключ читать далее.



8.4.6. Check of the moments of gear shifting

GENERAL INFORMATION

Check the gear shifting moments if transfers switch too early or too late.

Do a bit of traveling on the car on all transfers under all road conditions. You do not carry out an inspection in road conditions in the presence of obvious mechanical damages.

When checking the moments of gear shifting, do not forget that indications of a speedometer can vary in view of tolerances by production.

Define at what speed there is a switching of transfer and compare the received values to data in the table.

Transfers have to switch easily and quickly, without loss of power.

Listen whether operation of the engine at gear shifting accelerates. If it occurs, it demonstrates to what brake tapes and couplings slip.

After check in road conditions, check the transmission for tightness.

If the moments of gear shifting are not right or lower transfers do not join, check adjustment of a rope of management of a butterfly valve and an accelerator pedal rope.

Transmission 089
code designation KAU
Moments of gear shifting (km/h)
Transfer Completely open butterfly valve The pedal is squeezed out up to the end
1 – 2 35 – 37 67 – 80
2 – 3 89 – 110 121 – 133
3 – 2 55 – 84 104 – 114
2 – 1 23 – 30 48 – 61

Inhaling moment

Fastening of a flexible plate to a bent shaft 45 N of m.
Fastening of a half shaft to a drive flange 45 N of m.
Bolts of fastening of the hydrotransformer 30 N of m.
Bolts of fastening of the transmission to the engine 35 N of m.