Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
- 1.2. Identification of the car
   1. Maintenance instruction
   1.3. Arrangement of identification plates
   1.4. Dashboard
   + 1.5. Service of the car
   - 1.6. Independent service of the car
      1.6.2. Small-sized spare wheel
      1.6.3. Replacement of a wheel
      + 1.6.4. Safety locks
      - 1.6.5. Replacement of bulbs
         1.6.5.1. Headlights of forward light
         1.6.5.2. Forward indexes of turns and marker lights
         1.6.5.3. A back block headlight on a back wing
         1.6.5.4. The central stoplight on back glass
         1.6.5.5. Back fog lights and headlights of tail light in a trunk lid
         1.6.5.6. Bulbs of illumination of registration plate
         1.6.5.7. Back side dimensional lamp
         1.6.5.8. Plafond of illumination of salon
         1.6.5.9. Bulbs for reading cards
         1.6.5.10. Fog lights
         1.6.5.11. Lamp of illumination of a motive compartment
         1.6.5.12. Lamp of illumination of a luggage carrier
      1.6.6. Car audio replacement
      1.6.7. Raising of the car
      1.6.8. General rules of towage
   + 1.7. Specifications
   1.8. Capacities
   1.9. Sizes
   1.10. Loadings
   1.11. Schedule of preventive servicing / lubricant of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment






1.6.5.8. Plafond of illumination of salon

GENERAL INFORMATION

Audi 1986-1989 models of years

By means of a flat edge of the screw-driver press on a clip (it is specified by an arrow) in the direction of the switch.

For cars with the opening top hatch accurately insert a flat edge of the screw-driver between the right edge of a frame and the panel of finishing. Squeeze out a frame.

Remove a lamp frame from the finishing panel.

Remove a bulb.

Insert a new bulb.

Establish a frame of a lamp having inserted at first the party with the switch, and then press on the second edge so that spring clips became isolated.

Audi1990-1992 models of years

Accurately insert a flat edge of the screw-driver between the right edge of a frame and the panel of finishing (it is specified by an arrow). Squeeze out a frame.

For cars with the opening top hatch, insert a screw-driver edge on the left side of a frame.

Remove a lamp frame from the finishing panel.

Remove a bulb.

Insert a new bulb.

Establish a frame of a lamp having inserted at first the party with the switch, and then press on the second edge so that spring clips became isolated.