Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
- 1.2. Identification of the car
   1. Maintenance instruction
   1.3. Arrangement of identification plates
   1.4. Dashboard
   + 1.5. Service of the car
   - 1.6. Independent service of the car
      1.6.2. Small-sized spare wheel
      1.6.3. Replacement of a wheel
      + 1.6.4. Safety locks
      - 1.6.5. Replacement of bulbs
         1.6.5.1. Headlights of forward light
         1.6.5.2. Forward indexes of turns and marker lights
         1.6.5.3. A back block headlight on a back wing
         1.6.5.4. The central stoplight on back glass
         1.6.5.5. Back fog lights and headlights of tail light in a trunk lid
         1.6.5.6. Bulbs of illumination of registration plate
         1.6.5.7. Back side dimensional lamp
         1.6.5.8. Plafond of illumination of salon
         1.6.5.9. Bulbs for reading cards
         1.6.5.10. Fog lights
         1.6.5.11. Lamp of illumination of a motive compartment
         1.6.5.12. Lamp of illumination of a luggage carrier
      1.6.6. Car audio replacement
      1.6.7. Raising of the car
      1.6.8. General rules of towage
   + 1.7. Specifications
   1.8. Capacities
   1.9. Sizes
   1.10. Loadings
   1.11. Schedule of preventive servicing / lubricant of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment


1.6.5.2. Forward indexes of turns and marker lights

GENERAL INFORMATION

Open a cowl and prop up it.

Remove casings from headlights.

To replace a bulb, get headlights of the index of turns and a marker light. For removal of headlights press on both clips in the direction of arrows, and at the same time push out headlights forward.

Remove headlights.

Turn a cartridge with a bulb counterclockwise and pull out it.

Press an old bulb into a cartridge, turn it counterclockwise, get and establish a new bulb.

Insert a cartridge with a bulb into the case of a headlight and turn clockwise so that it densely became into place.

Establish into place a headlight of the index of turns and a marker light, having inserted clips into the corresponding openings and having implanted both plastic uvulas on the headlight case into their openings. Insert a headlight as it is possible further.