Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
- 1.2. Identification of the car
   1. Maintenance instruction
   1.3. Arrangement of identification plates
   1.4. Dashboard
   + 1.5. Service of the car
   - 1.6. Independent service of the car
      1.6.2. Small-sized spare wheel
      1.6.3. Replacement of a wheel
      + 1.6.4. Safety locks
      - 1.6.5. Replacement of bulbs
         1.6.5.1. Headlights of forward light
         1.6.5.2. Forward indexes of turns and marker lights
         1.6.5.3. A back block headlight on a back wing
         1.6.5.4. The central stoplight on back glass
         1.6.5.5. Back fog lights and headlights of tail light in a trunk lid
         1.6.5.6. Bulbs of illumination of registration plate
         1.6.5.7. Back side dimensional lamp
         1.6.5.8. Plafond of illumination of salon
         1.6.5.9. Bulbs for reading cards
         1.6.5.10. Fog lights
         1.6.5.11. Lamp of illumination of a motive compartment
         1.6.5.12. Lamp of illumination of a luggage carrier
      1.6.6. Car audio replacement
      1.6.7. Raising of the car
      1.6.8. General rules of towage
   + 1.7. Specifications
   1.8. Capacities
   1.9. Sizes
   1.10. Loadings
   1.11. Schedule of preventive servicing / lubricant of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment


1.6.5.7. Back side dimensional lamp

GENERAL INFORMATION

Audi-80/Audi-80 Quattro, Audi-90/Audi-90 Quattro

Open a trunk lid.

Remove the soft panel of finishing.

For receiving access to a bulb of the left back side dimensional lamp, get a small-sized spare wheel and jack / tool kit in the beginning.

Remove a cartridge with a bulb. Pull out a bulb.

Establish a new bulb and insert a cartridge into place.

Install back soft panel of finishing.

Audi-Kupe and Quattro

Open a trunk lid.
Open a cover in the finishing panel on the right side and turn a jellied mouth of a washer reservoir of back glass in a luggage carrier. For receiving access to a bulb of the left back side dimensional lamp, get a small-sized spare wheel and jack/tool kit in the beginning, and then remove the soft panel of finishing.

Accurately get a cartridge with a bulb. Pull out a bulb.

Establish a new bulb and insert a cartridge into place.

Install back soft panel of finishing.