Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
- 9. Suspension brackets, wheels
   9.1.1. Elimination of resonance / vibration of a cross-piece (4-cylinder models)
   9.1.2. Change of a design of a forward suspension bracket
   9.1.3. Half shaft
   9.1.4. Suspension bracket rack
   9.1.5. CV JOINTS
   9.1.6. Suspension bracket rack (all-wheel drive models)
   9.1.7. CV JOINTS (all-wheel drive models)
   - 9.2. Back suspension bracket
      9.2.1. Oil cap
      9.2.2. Wheel bearings
      9.2.3. Removal and installation of the back bridge
      9.2.4. Suspension bracket rack
      9.2.5. Change of a design of a back suspension bracket
   + 9.3. Wheels and tires
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment






9.2.2. Wheel bearings

Installation

PERFORMANCE ORDER
1) establish an external holder of the internal wheel bearing
2) establish an external holder of the external wheel bearing
3) establish a rotor (for cars with ABS)
4) adjust an inhaling of wheel bearings: the inhaling of bearings is adjusted correctly if the persistent washer can be moved the screw-driver (in the direction of an arrow) having made simple effort of a hand (at the same time it should not move at rotation of the screw-driver and should not be clamped so hardly that for its shift the long lever was required)