|
Kill the engine.
Remove a cap from a cover of a head of the block of cylinders.
Add only that amount of oil which is necessary. The difference in number of oil between the marks "Max" and "Min" in the probe makes about 1 liter.
Do not fill in oil above the mark "Max".
Otherwise, excess of oil can get through сапун an engine case to the exhaust system. Then oil will burn down in the catalytic converter that will lead to damage of the engine.
Always use only high-quality oil of the required type and viscosity.
Establish a cover and reliably twirl.
Prevention
The cap of an oil-filling mouth should be twisted reliably to prevent oil leak as it is fire-dangerous.
|