since 1986-1991 release
Repair and operation of the car
- 1.2. Identification of the car
1. Maintenance instruction
1.3. Arrangement of identification plates
- 1.5. Service of the car
1.5.2. Seasonal change like fuel
1.5.3. Petrol additives
1.5.4. The latest news in the field of fuel
1.5.6. Engine compartment
- 1.5.7. Engine oil
22.214.171.124. Identification of engine oil
126.96.36.199. Consumption of engine oil
188.8.131.52. Check of level of oil in the engine
184.108.40.206. Addition of oil in the engine
220.127.116.11. Replacement of engine oil
1.5.8. Oil filter of the engine
+ 1.5.9. Automatic transmission liquid
1.5.10. MKPP oil
1.5.11. Air filter
1.5.12. Spark plugs
+ 1.5.13. Hydraulic booster of steering and amplifier of the brake system
+ 1.5.14. Brake fluid
+ 1.5.15. Cooling system
+ 1.5.16. Tanks for washers of a windshield and headlights of forward light
1.5.18. Brushes of screen wipers
+ 1.5.19. Tires / wheels
+ 1.6. Independent service of the car
+ 1.7. Specifications
1.11. Schedule of preventive servicing / lubricant of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment
Audi-80/Audi-80 Quattro, Audi-90/Audi-90 Quattro
Audi-90 Quattro 20V, Audi of Coupet Quattro
It is the best of all to check the oil level when the engine is heated-up.
Kill the engine.
For receiving exact measurements the car has to stand on a plain surface. After a stop of the engine wait several minutes that oil gathered in the oil pallet.
Pull out the probe for measurement of level of oil and wipe it dry by means of a rag.
Insert the probe: insert it up to the end that measurement was exact.
Again pull out the probe. Level of oil is normal if it is between the marks "Max" and "Min" in the probe.
If the level of oil is lower than the mark "Min" or is not designated absolutely, immediately add oils.
After determination of level of oil insert the probe up to the end into an opening.