Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
- 8. Transmission
   8.1.2. A fork - the main cylinder of coupling
   8.1.3. Press clutch plate
   8.1.4. Malfunctions of coupling
   + 8.2. Mechanical transmission 012
   - 8.3. Mechanical transmission 01A
      8.3.2. Removal and installation of the transmission
      8.3.3. Dismantling and assembly of the transmission
      - 8.3.4. Differential
         8.3.4.2. Differential mechanisms
         8.3.4.3. Removal and installation of differential
         8.3.4.4. Dismantling and assembly of differential
      8.3.5. Driveshaft
      8.3.6. Central cardan hinge
   + 8.4. Automatic transmission 089
   + 8.5. Automatic transmission 087
   8.6. Dismantling and assembly of automatic transmissions
   8.7. Block of valves
   + 8.8. Automatic transmission 097
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment


8.3.4.4. Dismantling and assembly of differential

GENERAL INFORMATION

Differential, dismantling / assembly

1. Leading gear wheel
together with a gear wreath
2. Internal holder of the big bearing of the leading gear wheel
3. External holder of the big bearing of the leading gear wheel
4. S3 washer
note thickness
5. Case of the main transfer
6. Expansion plug
always replace
7. External holder of the small bearing of the leading gear wheel
8. Internal holder of the small bearing of the leading gear wheel
9. Epiploon
remove by means of the VW 771 tool and VW771/37
10. Flange
when replacing use the new expansion plug truly to determine the inhaling moment
11. Nut of the leading gear wheel
record by means of sealant D 000 6000