Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
- 11. Steering
   11.2. Shaft and casing of a steering column
   11.3. The power absorbing steering column
   11.4. Steering drive
   11.5. Pipeline of high pressure / return pipeline
   11.6. Adjustment of a free wheeling of a lath of steering
   11.7. Maple belt
   - 11.8. System of hydrostrengthening of steering
      11.8.1. Technical characteristics
      11.8.2. Pumping / filling of hydraulic liquid
      11.8.3. Check on tightness (at the working engine)
      11.8.4. Steering transfer
      11.8.5. Pump of the hydraulic booster of steering (Vickers)
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment


11.8.1. Technical characteristics

GENERAL INFORMATION

Car
Audi-Kupe
Wheel base
2548.5 mm
Distance between wheels with own mass of the car, forward wheels / back wheels
1453 mm / 1437 mm
Angle of rotation of forward wheels from an emphasis against the stop with own mass of the car, on an outer edge of wheels
37o20'
Angle of rotation of forward wheels from an emphasis against the stop with own mass of the car, on an inner edge of wheels

33o25'

Quantity of whole revolutions of a steering wheel from one extreme situation to another
3.2
Transfer relation of the steering mechanism
16.8:1
Amount of liquid for system of hydrostrengthening of steering, approximately

1.9 liter