Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car

Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
- 11. Steering
   11.2. Shaft and casing of a steering column
   11.3. The power absorbing steering column
   11.4. Steering drive
   11.5. Pipeline of high pressure / return pipeline
   11.6. Adjustment of a free wheeling of a lath of steering
   11.7. Maple belt
   + 11.8. System of hydrostrengthening of steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment

11.6. Adjustment of a free wheeling of a lath of steering

GENERAL INFORMATION

Elements of the toddler of a lath

1. Adjusting screw
2. The Uplotnitepny ring, always replace, was not established on models to VIN 89 JA 413 627
3. Epiploon plug
4. Cover

Carrying out adjustment of a free wheeling of a lath requires 2 mechanics. Adjustment is carried out at the killed engine, the car when carrying out adjustment has to stand on the earth. Wheels have to stand directly.

Adjusting screw

PERFORMANCE ORDER

1) turn a steering wheel here and there approximately on ^30o from the central situation and listen whether the scratch or knock publishes the rack mechanism of steering
	2) at the same time the second mechanic has to twist the adjusting screw (it is specified by an arrow) clockwise so far the scratch and knock will not stop
3) carry out control driving and adjust a free wheeling of a lath once again if it is necessary

The system of hydrostrengthening of steering is filled with hydraulic liquid, a detail G 002 000.