Audi 80/90/Coupe

since 1986-1991 release

Repair and operation of the car



Audi 80/90/Coupe
+ 1.2. Identification of the car
+ 2. Engines, carburetors
3. Lubrication system
+ 4. Cooling system
+ 5. Fuel system
+ 6. Exhaust system
+ 7. System of ignition
+ 8. Transmission
+ 9. Suspension brackets, wheels
- 10. Brake system
   10.1.2. Brake shoes of forward brakes
   10.1.3. Brake shoes of back brakes
   10.1.4. General adjustment of back brakes (Girling)
   10.1.5. Replacement of brake shoes (all-wheel drive models)
   10.1.6. General adjustment of back brakes (Girling) (all-wheel drive models)
   10.1.7. Forks of pedals of a brake and coupling
   10.1.8. Adjustment of the emergency brake
   10.1.9. Removal of the lever of the emergency brake
   + 10.2. Hydraulic components
   + 10.3. Anti-blocking system of brakes
+ 11. Steering
+ 12. Body, salon
+ 13. Air conditioning system
+ 14. Electric equipment






10.1.3. Brake shoes of back brakes

Replacement of brake shoes

PERFORMANCE ORDER
1) remove back wheels

Prevention

At installation of old brake shoes mark them to establish on the initial place.


2) remove a brake support (hold the directing pin a wrench when untwisting bolts)
3) remove brake shoes
4) twist the support piston in the cylinder, having pressed on the piston and rotating it clockwise by means of a wrench with a cap head, make effort in the direction of arrows
5) establish brake shoes
6) establish a support and fix it by the new bolts tightened to 35 N. m.

Prevention

In a repair kit there are four самоконтрящихся a bolt which need to be used.

After installation of new brake shoes carry out the general adjustment of back brakes.